fbpx

12.6V 10A BMS Charger Protection Board for Pack of 3 18650

৳ 250.00

Available : 1 Sold : 5

1 in stock

SKU: 8371 Category:

3 series 18650 12 V to 12.6 V lithium battery 10.8 V to 10.8 V protection board (can be used for more than three series, and maximum support and 5)
Note:
This cannot be used for iron from polymer battery protection board, hand electric drill battery, electric fish electromechanical ChiZu, electric bicycle batteries, 2 piece series 24 v, 775 (4 a) above, electrical fisheye 1 w LED lamp, used for the combined purchase customers please note!.

Described within the scope of power is suitable for the following products:
Massager battery back-up power, LED lamp, 12 v electronic products, battery pack, monitoring standby power, solar street lamps and other products.
Note: more than 3 a current discharge products, battery discharge rate is more than 3 c.
Ratio calculation formula: 1 c rate of the battery, 2000 capacity is equal to 2 ah * 1 = 2 a maximum working current.
3 c ratio battery, 2000 capacity is equal to 2 ah * 3 = 6 a maximum working current.
In use battery heats is ratio is not applicable, this situation must not be used for a long time, the battery will soon be damaged.

 

Description:
3 series (for three 18650 batteries or polymer lithium battery series combination)
The rated voltage of 10.8 V (polymer battery)
18650 or 11.1 V (nominal voltage of 3.7 V lithium battery)
12.6 V voltage after a full battery (lithium)
8 a discharge (refers to the maximum discharge current limit)

The attribute of the lithium battery protection board:

Model: HX-3S-A02
Size: 51 * 10 * 3.0MM
The maximum working current: 3-4A

Maximum instantaneous current: 7-8A
Static electricity: less than 10UA
Resistance: less than 60 mΩ

Charging voltage range: 4.25-4.35V + / – 0.05V
Discharge voltage range: 2.3-3.0V + / – 0.05V
Working temperature: – 40 – + 50 °
Storage conditions: – 40 – + 80 °
Useful life: more than 30000 hours
Short circuit protection, can protect, delay the recovery

 

The protection plate size and device description;
The protection plate size of 51 * 10 * 3 mm;Components for seiko S – 8254 aa protection chip and authenticity of AOS 4407 a * 2;

aeProduct.getSubject()

Customer reviews
  • 0
    0 ratings
  • 5 Stars
    0%
    4 Stars
    0%
    3 Stars
    0%
    2 Stars
    0%
    1 Star
    0%
Reviews

There are no reviews yet.

Write a customer review

Be the first to review “12.6V 10A BMS Charger Protection Board for Pack of 3 18650”