Weight: 1.8 oz. (52 grams)
Diameter: 1.1 inches (28.5mm)
Length: 1.7 inches (30.5mm)
Exposed Shaft: 1/8″ x 7/16″ (3.0mm x 11.1mm)
Voltage: 7.2 – 13
Current: Maximum of 15 Amps for 30 Seconds
Mounting holes are spaced 16mm and 19mm on center and are tapped for 3.0mm screws.
|Battery Size||Propeller Size||Thrust (oz.)||Current (amps)||Notes|
|3-Cell 11.1v||GWS 1060DD||27 oz.||14.5 amps||159 watts|
|3-Cell 11.1v||Emax 10 x 4.5SF||28 oz.||14.7 amps||158 watts|
|3-Cell 11.1v||Emax 1050CF*||23 oz.||13.6 amps||155 watts|
|3-Cell 11.1v||APC 9 x 4.7SF||24 oz.||12.0 amps||138 watts|
|3-Cell 11.1v||APC 9 x 3.8SF||26 oz.||12.0 amps||140 watts|
|3-Cell 11.1v||APC 9 x 6E||25 oz.||12.7 amps||145 watts|
|3-Cell 11.1v||APC 9 x 4.5E||23 oz.||10.0 amps||125 watts|
|3-Cell 11.1v||APC 8 x 6E||18 oz.||10.7 amps||126 watts|
|2-Cell 7.4v||APC 11 x 5.5E||19 oz.||10.0 amps||90 watts|
|2-Cell 7.4v||GWS 1147SF||20 oz.||10.8 amps||79 watts|
|2-Cell 7.4v||GWS 1170DD||23 oz.||10.5 amps||83 watts|
|2-Cell 7.4v||Emax 1050CF*||12 oz.||8.25 amps||65 watts|
|2-Cell 7.4v||APC 10 x 5E||15 oz.||7.60 amps||61 watts|
*Emax 1050CF props are carbon-fiber props commonly used for multi-rotor aircraft.
Please be aware that the battery used can make a tremendous amount of difference in the performance of brushless motors. The above data was obtained using batteries in good condition that were fully charged. Thrust and amp draw may be less with the use of batteries rated at lower amp output, and slightly more using batteries rated for higher amp output. Other factors, such as ESC timing and variations in actual motor KV can affect the performance of brushless motors as well. We recommend the use of a Watt Meter to test the current draw of your particular power system, especially if you plan to use a prop that pushes the motor near it’s maximum amp rating.