fbpx

Mobile Phone Fast Charger Module QC4.0,QC3.0

৳ 620.00

Available : 5 Sold : 2

5 in stock

SKU: 17006 Categories: , ,

Power Supply 6V ~ 28V

 

Product Features

 

1. Strong compatibility. This product USES SW3518S (supports OPPO/ plus).

 

2. The charging plate has been installed with transparent heat shrinkable tube. Weld the power supply line.

 

Compact size (50*17*12mm), suitable for DIY!If the 12-volt power adapter can be used for daily mobile phone quick charging, can also be powered by batteries, solar panels, dc generators and so on!Suitable for outdoor/car/power outages and other occasions!This is the charger and charging treasure can not do!At home, a more reliable way to charge.

 

 

Compatibility Introduction

 

USB PD3.0 (PPS) support

Qualcomm QC4+/QC3.0 support

Huawei SCP/FCP support

OPPO VOOC support

Apple 2.4 A support

Samsung AFC support

One DASH support

VIVO 9V2A dual engine support

Mediatek PE2.0 support

 

High efficiency, Full power

External MOS tube, double wire and iron silicon aluminum magnetic ring, high efficiency, the same charging power lower heating.

Double parallel low resistance electrolytic capacitor +6 1206 ceramic capacitors. Only for higher performance.

Measured figure: the perfect realization of Huawei super-fast charging 5V 4.5A (SCP)

 

Additional Configuration

 

1. Flexible power supply

Full protocol quick charging module standard with red and black power supply line, if the optional shell, the default power supply interface is 5.5mm female seat and standard with 5.5 male head line!

 

2. High performance input anti-reverse connection

A dedicated MOS tube to do anti – reverse connection, although the cost is high, but the effect is far better than the diode, not hot. Novice DIY also need not worry about back to burn.

 

3. With the quick charging state indicator light

The blue light is the output indicator, the red light is the quick charging status indicator.

 

4. Exquisite shell + transparent top cover

 

Matters Needing Attention

 

1. For the quick charging of low voltage and large current, please use the original data cable. If you want to measure the charging voltage and current, you must use the USB meter with low internal resistance.Otherwise, the charging current will be affected.

 

2. TYPE_C port is used for output charging; Use the C-to-C/ TYPE_C dual data cable TO charge the mobile phone or laptop.

 

3. Use USB port to charge OPPO and oneplus mobile phones.

 

Protocols such as QC4+/ QC4.0/ PD3.0 should use TYPE_C port.

 

4. When the power supply voltage is higher than 21 volts, PD protocol at port C can support up to 20V3A output. The module is small in size.

 

5. When USB port and TYPE_C port are simultaneously plugged into the phone, both ports are 5V output.

 

 

Multi-Brand Mobile Phone Charging Test

 

USB port:

 

1. Charge Huawei Mate20 (power: 56%): Start SCP quick charge mode

Voltage 4.89v, current 4.59A

 

2. Charge Huawei P20 Pro (power 12%): Open SCP quick charge mode

Voltage 5.03V, current 4.25A

 

3. Charge Glory V20 (43% power) : Open SCP quick charge mode

Voltage 5.13V, current 4.5A

 

4. Charge MIUI 8 (18% power): Start QC3.0 quick charge mode

Voltage 6.44V, current 2.79A

 

5. Charge OPPO R17 (43% power) : start VOOC flash charging mode

Voltage 4.8V, current 3.8A

 

6. Charge the iPhone XS (5% power) : open the apple 2.4A mode

Voltage 5.22V, current 2.37A

 

7. Charge one plus 6T (charge 15%) : open DASH flash charging mode

Vltage 4.7V, current 3.8A

 

Type_C port:

 

1. Charge iPhone XR (power 7%) : turn on PD

Voltage 9.17V, current 1.91A

 

2. Charge iPhone X (7% power) : turn on PD

Voltage 9.17V, current 1.6A

 

3. Charge huawei Mate20Pro (55%) : turn on PD

Voltage 9.20V, current 1.58A

 

4. Charge huawei P20 Pro (power 10%) : turn on PD

Voltage 9.17V, current 1.69A

 

5. Charge glory V20 (power 40%): turn on PD

Voltage 9.05V, current 1.7A

 

6. Charging millet 8 (power 6%): start quick charging

Voltage 6.1V, current 2.63A

Customer reviews
  • 0
    0 ratings
  • 5 Stars
    0%
    4 Stars
    0%
    3 Stars
    0%
    2 Stars
    0%
    1 Star
    0%
Reviews

There are no reviews yet.

Write a customer review

Be the first to review “Mobile Phone Fast Charger Module QC4.0,QC3.0”