RC PRODUCT BD

DC 5-35V To 1.25-30V 3A Step Down Buck Power Supply Module LM2596

(0.00)

৳200.00

sold: 2 items

Stock:1 Items In Stock

Update content:

1.Fixed turn the lamp current to 0.1 times the value of the constant current (charge when used to identify whether the battery is full);

2. Increased input reverse polarity protection diode;

3. Increase the output of a backflow preventing diode to prevent when the electricity to charge the battery back in;

4. Using dedicated reference IC, and high-precision sampling resistor, so that the constant current is more stable, (20 degrees to 100 degrees, the constant current 1A, when the temperature drift of less than 1%).

Particularly suitable for LED driver

High-power LED constant current drive

Lithium battery charger (including ferroelectric)

4V, 6V, 12V, 14V, 24V battery charger

Nickel cadmium, nickel metal hydride battery pack charger

Solar panels and wind turbines

Specifications:

Input Voltage: 5-35V

Output Voltage: Continuously adjustable from 1.25 V to 30V

Rated Output Current: 3A

Max. Output Current:4A(more than 15W, preferably with a heat sink)

Size (L x W x H): Approx. 1.9 x 0.95 x 0.5 inch / 4.8 x 2.4 x1.3cm

Indicator Light

Constant current indicator(red)

Charging indicator(red)

Charged full (green)

Battery use:

l Make sure of the voltage and current of the battery you need to charge

l Adjust the constant voltage potentiometer to make the output voltage same to the charge voltage

l Potentiometer Adjustment Direction: Clockwise (increase), counterclockwise (decrease)

Use the multimeter in 10A current scale to measure output short-circuit current, and adjust the current potentiometer to make sure the output current to the expected charging current value

l The charge current of transfer lamp is default 0.1 times of the charging current (constant current value)

l Connected to the battery and try to charging (for previous 5 steps, module input terminal is connected to power source, output load is NOT connected to batteries)

LED Constant Current Driver Use:

l Make sure operating current and Max operating Voltage of the LED you need to drive

l Adjust the constant voltage potentiometer to make sure the output Voltage is up to LED Max operating Voltage

Use the multimeter in 10A current scale to measure output short-circuit current, and adjust the current potentiometer

l to make sure the output current to the expected LED operating current

l Join LED, test (For the above 3 steps, module input terminal is connected to power source, output load is NOT connected to LED)

Package included:

1 x Adjustable Power Supply Module

(3020 reviews)

Address: Saidabad Wasa Rd, Dhaka 1204
Contact Seller:+8801687-192610

Rating

97%

Ship on time

100%

Chat response

95%

Noodles & Company is an American fast-casual restaurant that offers international and American noodle dishes and pasta in addition to soups and salads. Noodles & Company was founded in 1995 by Aaron Kennedy and is headquartered in Broomfield, Colorado. The company went public in 2013 and recorded a $457 million revenue in 2017.In late 2018, there were 460 Noodles & Company locations across 29 states and Washington, D.C.